[. . . ] The computer does not return from Standby mode c Touch the touchpad or press any key to exit this mode. I cannot return from a power-saving mode with the mouse c Press any key or the power button to return from a power-saving mode. The mouse does not move smoothly after returning from a powersaving mode c Disconnect the mouse from the USB connector, and then reconnect it after a few seconds. The mouse pointer does not move smoothly across the screen An optical mouse senses mouse movement by using the optical sensor to detect the shadows caused by the red light on the bottom of the mouse. [. . . ] When carrying the mouse, wind the cable around the mouse and secure the cable with the cable clip. If necessary, you can adjust the mouse pointer speed under "Mouse Properties". To prevent fire or shock hazard, do not expose the unit to rain or moisture. for customers in Europe This product conforms to the following European Directives: 89/336/EEC, 92/31/EEC (EMC Directives) and 93/68/EEC (CE marking Directive). This product complies with European standards EN55022 Class B and EN55024 for use in the following areas: residential, commercial and light industrial. It also complies with the EN 60825-1, being classified as a CLASS 1 LED product. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. ⷠAll other names of systems, products, and services are trademarks of their respective owners. In this manual, Microsoft® Windows® XP Home Edition and Microsoft® Windows® XP Professional are referred to as Windows XP. Wind the cable around your hand, fitting each loop into the cable clip as you do so. Take the cable that is wrapped around your hand and fit it into the groove in the cable clip. Do not place the USB mouse in a location where it is: · on an unstable surface · In very humid areas or where there is no ventilation · subject to excessive dust · Subject to direct sunlight or extreme heat · Click "Start", then "Settings", and then click "Control Panel". double-click "System"* , and then click the "Device Manager" tab. * If you are using a Windows Me model, and cannot find the icon you are looking for, click "View all Control Panel options". If the USB mouse is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the inside of the mouse. If the mouse does not work properly after one hour, consult your nearest Sony dealer. When there is only a horizontal scroll bar displayed in the window, you can rotate the wheel button at any time to scroll the window contents to the left or right. note The scrolling behavior of a window may vary, depending upon the software program displaying the window. Clean the mouse with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. Press and hold the wheel button while moving the mouse to scroll up, down, left, or right. Click "Start", then "Settings", and then click "Control Panel". [. . . ] Click "Start", and then select "Printers and Other Hardware" from "Control Panel". Then in "See Also" on the left of the screen, click "System", click the "Hardware" tab, and then click the "Device Manager" button. 2 Click the "+" mark on the left of "Mice and other pointing devices" and confirm that "HID-compliant mouse" is displayed. ⷠThe appearance of the pointer may differ depending on the software program you are using. [. . . ]